- Protect against engine exhaust
- Repel black streaks
- Seals and protects paint and gelcoat
- Fast and easy application, it dry to a haze
DESCRIPTION: This product is a powerful POLYACRYLOMER® Resin-based surface sealant designed to seal and protect finishes from black streaks, engine exhaust, industrial fallout, salt air, acid rain, and UV rays and also provide and amazing wet look shine. It seals and protects paint, gel coat and all hard surfaces. May be used on all gel coat surfaces regardless of age. Sea-Shield® Exhaust Guard® is specifically designed for professional detailers as well as crew and owners who are looking for the perfect finish in gel coat or painted surfaces.
INSTRUCTIONS Apply sealant to a clean, buffed and well-prepared surface. Use a small amount on an applicator and wipe until surface is thoroughly covered. This product can also be applied using a Random Orbital with a soft pad. Let dry 5 to 20 minutes before wiping off. Use a clean microfiber towel to remove all excess. On porous surfaces remove excess before it dries. Product becomes fully cured in 24 hours.
email@example.com (Wednesday, 16 October 2013)
I used this on my whole boat this year, over top of the Nano Coating. It was the easiest to apply wax I've used, leaving no streaks and lasted from
mid-April to beginning of September where it's started to fade.rnBlack streaks were greatly diminished and almost all of them could be removed with
simple soap and water. The remaining few, on occasion, I had to use either the Nano-Fresh, or sometimes a bit of cleaner wax.rnThis helped reduce my
boat washing time from 2.5-3hours, to about 45 minutes!rn
firstname.lastname@example.org (Thursday, 02 February 2012)
I'm the captain of a 130 westport yacht and our Awlgrip paint is 6 years old.By using Exhaust Guard our paint looks clean all the time. The Sea-Shield
Paint Polishing and Protection System is extending the need of a new paint job.