Sea-Shield Swirl Remover#3 is a polish designed to remove light oxidation, fine scratches, light chalk,from both painted and gelcoat.
Removes light oxidation, fine scratches
Completely erases swirl marks
Brings back the ultimate luster
Extremely lubricated formula
DESCRIPTION Sea-Shield Swirl remover or Step #3 is a polish designed to remove light oxidation, fine scratches, light chalk, and light swirl marks from both painted and gel coat. .
INSTRUCCTIONS Best results are achieved when using an air or electric circular polisher (1000-1500 R.P.M) equipped with a Sea-Shield® polishing buffing pad #3. Apply product to pad or surface to be buffed. Spread product before starting machine to reduce product sling. Start machine using medium pressure while working in a two foot by two foot area. Move machine slowly back and forth keeping pad flat on the surface at all times. Reduce pressure as product begins to dry. Spur buffing pad with light pressure and rebuff surface until most residue is gone. Wipe remaining residue off using a clean, dry microfiber towel. (Use Sea-Shield Buffing Lube as needed.) For added shine and swirl-free finish, follow up using Random Orbital Polisher and Orange Pad. Follow with Sea-Shield® Polymer Sealant to protect gloss. (For extra protection it’s recommended to apply Sea-Shield® Nano Coating before sealant.)